Best Sellers

Description： A pit bull terrier in Halloween trim on a 28 x 40 in house flag - for the households where the wide grin and the blocky head are the entire personality of the house, and the flag says so before anyone rings the...

Description： A Vizsla puppy on a house flag, in the rust-gold coat that is the whole reason anyone picks the breed - and at 28 x 40 in it is finally large enough for that color to read from the street. Heavy polyester, printed...

Description： The wrinkles are the joke, and at house-flag scale they finally fill the print: a Shar Pei puppy done up for Halloween on 28 x 40 in of heavy polyester. It is printed on both sides, the back a mirror of the front...

Description： A black pug - the coat that makes the face do the work - printed on a 28 x 40 in house flag and dressed for Halloween. Heavy polyester with the artwork through both layers, so the back is a mirror image by...

Description： A Doberman is already the Halloween dog - the outline does half the job before anyone adds a costume - so this print keeps the lines and adds the trim, on a 28 x 40 in house flag. Heavy polyester, printed both sides...

Description： A Border collie puppy in Halloween kit on a house flag, which suits a breed that spends its life looking up at something further away than the fence. 28 x 40 in of heavy polyester, double sided so the reverse carries a mirror...

Description： A Yorkshire terrier done for Halloween at a size that outranks the dog: 28 x 40 in of heavy polyester with the print going through both layers, so the side facing the street and the side facing the door show the same artwork,...

Description： A Min Pin - the smallest of the breeds and the one with the highest opinion of itself - blown up to 28 x 40 in on a house flag, which finally gives it the scale it thinks it has. Heavy polyester, printed...

Description： One long, low Halloween scene instead of a single tall figure: about 8 ft of pumpkins, ghosts, eyeballs and candy running across the front of the yard, lit from inside by seven warm white LEDs so it reads after dark without a separate...

Description： A Cairn Terrier in Halloween print across a working drying mat rather than a decorative one: a polyester face that takes the water off the dishes, a foam middle that keeps air moving underneath so they dry on both sides, and a non-slip...

Description： An English bulldog done for Halloween on a 14 x 22 in drying mat, which is a kitchen tool first and a decoration second. The face is water-absorbent polyester, the middle is foam that holds the air gap so dishes dry underneath as...

Description： A golden retriever in Halloween trim on a 14 x 14 in cushion, with the insert in it already - ready for the sofa rather than waiting for a form you have to buy. Woven canvas that sheds splashes, colorfast dyes so the...

Description： A Basenji in Halloween dress on an 18 x 18 in cushion - the size that fills a sofa bay on its own. The insert comes with it, so there is nothing second to order, and the cover is a woven canvas built...

Description： A Cavalier spaniel in Halloween dress, printed on aluminum in an 8 x 8 in frame three quarters of an inch deep. The breed artwork is the reason anyone buys it, so it is printed at a size that reads at close range...

Description： A witch in flight, printed on aluminum and set in an 8 x 8 in frame that is three quarters of an inch deep. No glass in it, which is exactly why it can go where Halloween art usually cannot: a bathroom wall...

Description： A Boston Terrier in Halloween trim on a 14 x 14 in cushion that arrives with the form already inside it - the finished pillow, not a cover you have to feed a spare insert into. The cloth is a woven canvas made...

Description： A pair of calavera sugar skulls printed across two 7.5 x 7.5 in hot pads, so the Day of the Dead artwork is doing something useful instead of sitting on a shelf. Quilted around an insulating fill, with a reflective layer behind it...

Description： An 18 x 18 in cushion - the sofa-filling size rather than the accent one - with a Pomeranian done for Halloween across the front and the form already inside it. The fabric is a woven canvas made to shed splashes, the dyes...

Description： La Llorona on a pair of working hot pads: 7.5 x 7.5 in each, full color artwork on the face, black trim, and a quilted body with a reflective layer behind the fill so the heat goes back into the pan rather than...

Description： A Dalmatian in Halloween kit on a house-size flag, which is the version of this design that actually gets seen: 28 x 40 in of heavy polyester, printed through both layers so the back mirrors the front instead of showing a pale reverse...

Description： A yellow lab puppy in Halloween trim at house-flag scale - 28 x 40 in of heavy polyester, printed both sides so the back mirrors the front instead of showing a washed-out reverse. The dyes are heat-set rather than surface printed, which is...

Description： A corgi done as a witch - short legs, hat, and the whole trick of the breed in one print - on a 28 x 40 in house flag. Heavy polyester, double sided so the design is mirrored through the back rather than...

Description： The Reaper, full size on a house flag: 28 x 40 in of heavy polyester with the design printed on both sides, so the back carries the same artwork mirrored rather than a faded version of it. The dyes are heat-set into the...

Description： A fawn pug in Halloween trim, printed on aluminum and dropped into a frame three quarters of an inch deep at 8 in square. That build is the reason this is the version a pug owner can actually hang in a bathroom or...

Description： Almost eight feet of ghost, up on a blower and lit from inside: three LED lights plus a flame effect, with red eyes that flash, so the thing you see from the road is the face rather than the whole body. The cloth...

Description： A white poodle in Halloween trim on a 14 x 14 in cushion, with the form inside it - this is the finished pillow, not a cover you have to feed a spare insert into. The fabric is a woven canvas made to...

Description： A pair of 7.5 x 7.5 in pot holders with a chow chow done for Halloween printed across the front in full color, finished with black trim. Quilted around an insulating layer, so they do the job they look like they are only...

Description： A pocket compact - 2.75 x 3 x 0.3 in, silvertone metal, witches printed on the front - and the useful part is inside: two mirrors when it opens, so you get the close view and the full one without carrying two things....

Description： She hangs by the arms, swings on the rope, and answers to noise: call out to her, or brush her, and she starts making sounds while her eyes flash red. 45 in high and 18 in long, with a floral dress, sewn mouth...

Description： The two shapes everyone buys for October, molded into one piece: a pumpkin body with a skull head on top, cast in resin at 7.88 x 6.30 x 6.38 in and lit with a warm glow that comes out through the molded detail....

Description： Four little scenes: a witch perched over a cauldron that glows green from inside, each witch molded between about 3.7 and 4.5 in tall over a cauldron 1.6 in across. Resin, painted, and small enough to scatter down a mantel, ring a cake...

Description： Two standing gnomes at 11.8 in, each in a different style, made the Scandinavian tomte way: a long beard of fiber fur, a soft body in non-woven fabric, and Halloween trimmings on top - a BOO banner on one, bat detailing on the...

Description： A 4.3 ft standing ghost with a trident, close to human height, and the thing that sells it is the trigger: make a noise near it and the body lights green while the sound effect runs, so the scare is timed to the...

Description： Two pieces that are meant to go together: a 49 in tarantula across the legs, black with a hairy finish and red eyes, and a 126 in stretch web in white polyester thread with hand-knotted joints. Every leg bends and holds a pose,...

Description： A full graveyard scene on a house-size flag - 28 x 40 in of heavy polyester, printed double sided so the back carries the mirror of the design instead of a washed-out version of it. The dyes are heat-set into the cloth rather...

Description： Three flat pieces to stand a mantel or a table up with: a white one 4.8 x 0.7 x 8 in, a black one 4.5 x 0.7 x 8 in and an orange one 6.7 x 0.7 x 7 in, cut from MDF...

Description： A pumpkin-headed ghost built to hang, not to stand: 15.7 in across, 13.4 in deep and 47.2 in long, on a steel frame in light green. When it hears noise it growls and its eyes go red, which is the effect that makes...

Description： A small ghost in a witch hat sitting up straight with an open book in its hands, molded in solid resin with a smiling face, and lit from inside with a warm amber LED. It runs on USB power, so there are no...

Description： A bear modelled in iron with a dark finish, done in the gothic vein rather than the woodland one - it belongs on a shelf between the candles and the books, or on a porch post, and it does not need to be...

Description： Three ceramic ghosts in felt witch hats - the indoor kind of Halloween, for a mantel, a shelf or a tray by the door where a six foot inflatable cannot go. They are glazed rather than fabric, so they wipe clean and the...

Description： A nearly four foot pumpkin ghost on a steel frame that wakes up when it hears something: the eyes go red, it starts howling, and it keeps going while the noise does. It arrives assembled - there is nothing to build - and...

Description： Two three foot reapers in tattered robes, with the skeletal face, bony hands and feet already modelled in. Each one has red LED eyes that light up and a horror scream that goes off when it is triggered, and because they hang, the...

Description： Two almost eight foot lengths of black lace woven with spider webs, cut to lie along a mantel or a console rather than to hang. It is the cheapest way to make a whole shelf look dressed: run it flat, let the ends...

Description： A small smiling ghost sitting over an open book with a warm light coming up through it. It is resin, not fabric, so it works as a proper ornament on a shelf or a bedside table all season rather than a thing you...

Description： Three painted wooden signs sized for the tiered-tray crowd - around four and five inches - with a white ghost, a black cat, a bat and a witch's broom between them. They are small, flat and light, so they go on a tray,...

Description： A twelve foot ghost that is only half there - clear PVC panels over a black and white body, so it reads as translucent when the light hits it. Two LED modules and a separate stage light inside throw the effect through the...

Description： An eighteen inch clown, which is exactly the wrong size for a clown to be - small enough for a table, a shelf or the middle of a stair landing. It is sound activated: noise brings the red eyes on, a male voice...

Description： Two three foot pumpkins that pop up out of the flat and stay up on their own frame, each one carrying LED lights worked through the ribs. Because they collapse flat they store in a closet without a fight, and because they are...

Description： Just under six feet of pumpkin with a ghost coming out of it - the middle size, which is the one that fits a normal front yard without taking the whole thing over. Five and a half feet wide and under three deep,...

Description： A three foot spider that is itself the light - 340 purple LEDs set through the whole body under an iridescent shell, so the shimmer catches the light by day and the glow does the work after dark. It stands on its own...