New In

Description： A full graveyard scene on a house-size flag - 28 x 40 in of heavy polyester, printed double sided so the back carries the mirror of the design instead of a washed-out version of it. The dyes are heat-set into the cloth rather...

Description： A 4.3 ft standing ghost with a trident, close to human height, and the thing that sells it is the trigger: make a noise near it and the body lights green while the sound effect runs, so the scare is timed to the...

Description： Four little scenes: a witch perched over a cauldron that glows green from inside, each witch molded between about 3.7 and 4.5 in tall over a cauldron 1.6 in across. Resin, painted, and small enough to scatter down a mantel, ring a cake...

Description： Two standing gnomes at 11.8 in, each in a different style, made the Scandinavian tomte way: a long beard of fiber fur, a soft body in non-woven fabric, and Halloween trimmings on top - a BOO banner on one, bat detailing on the...

Description： Three flat pieces to stand a mantel or a table up with: a white one 4.8 x 0.7 x 8 in, a black one 4.5 x 0.7 x 8 in and an orange one 6.7 x 0.7 x 7 in, cut from MDF...

Description： A pumpkin-headed ghost built to hang, not to stand: 15.7 in across, 13.4 in deep and 47.2 in long, on a steel frame in light green. When it hears noise it growls and its eyes go red, which is the effect that makes...

Description： Two pieces that are meant to go together: a 49 in tarantula across the legs, black with a hairy finish and red eyes, and a 126 in stretch web in white polyester thread with hand-knotted joints. Every leg bends and holds a pose,...

Description： A small ghost in a witch hat sitting up straight with an open book in its hands, molded in solid resin with a smiling face, and lit from inside with a warm amber LED. It runs on USB power, so there are no...

Description： A bear modelled in iron with a dark finish, done in the gothic vein rather than the woodland one - it belongs on a shelf between the candles and the books, or on a porch post, and it does not need to be...

Description： Two almost eight foot lengths of black lace woven with spider webs, cut to lie along a mantel or a console rather than to hang. It is the cheapest way to make a whole shelf look dressed: run it flat, let the ends...

Description： A small smiling ghost sitting over an open book with a warm light coming up through it. It is resin, not fabric, so it works as a proper ornament on a shelf or a bedside table all season rather than a thing you...

Description： Three painted wooden signs sized for the tiered-tray crowd - around four and five inches - with a white ghost, a black cat, a bat and a witch's broom between them. They are small, flat and light, so they go on a tray,...

Description： Three ceramic ghosts in felt witch hats - the indoor kind of Halloween, for a mantel, a shelf or a tray by the door where a six foot inflatable cannot go. They are glazed rather than fabric, so they wipe clean and the...

Description： Two three foot reapers in tattered robes, with the skeletal face, bony hands and feet already modelled in. Each one has red LED eyes that light up and a horror scream that goes off when it is triggered, and because they hang, the...

Description： A nearly four foot pumpkin ghost on a steel frame that wakes up when it hears something: the eyes go red, it starts howling, and it keeps going while the noise does. It arrives assembled - there is nothing to build - and...

Description： An eighteen inch clown, which is exactly the wrong size for a clown to be - small enough for a table, a shelf or the middle of a stair landing. It is sound activated: noise brings the red eyes on, a male voice...

Description： Just under six feet of pumpkin with a ghost coming out of it - the middle size, which is the one that fits a normal front yard without taking the whole thing over. Five and a half feet wide and under three deep,...

Description： A twelve foot ghost that is only half there - clear PVC panels over a black and white body, so it reads as translucent when the light hits it. Two LED modules and a separate stage light inside throw the effect through the...

Description： Nearly twelve feet of white ghost with a spider and an animated pumpkin worked into the base, so the tall piece and the small pieces are one purchase instead of three. Internal lights carry it after dark and the footprint - eight feet...

Description： Two nearly seven foot tentacles that look like something very large is climbing the house. They are built to break the plane of a window or a rooftop edge - the suction cups and ropes are in the box for exactly that -...

Description： Two three foot pumpkins that pop up out of the flat and stay up on their own frame, each one carrying LED lights worked through the ribs. Because they collapse flat they store in a closet without a fight, and because they are...

Description： A three foot spider that is itself the light - 340 purple LEDs set through the whole body under an iridescent shell, so the shimmer catches the light by day and the glow does the work after dark. It stands on its own...

Description： An archway with all four classics on it - a white ghost, an orange pumpkin, a green spider and a black bat - across ten and a half feet of purple. It is built to be walked through rather than looked at from...

Description： A howling wolf cut from black iron - the dark-academia version of a wolf piece, thin-lined so it works over a desk or a bed as easily as in a Halloween corner. It is lightweight iron, so one hook and a wall anchor...

Description： A cut-iron cat in a vintage black finish, drawn thin enough that it reads as gothic rather than as a holiday prop - which is the point of hanging it in a stairwell or a hallway where it stays up past October. It...

Description： A ghost coming up out of a carved pumpkin, under three feet tall, sized for the porch, the steps or the gap between the bigger pieces. Two internal LEDs light the pumpkin from below so the ghost looks like it is climbing out...

Description： Six feet of reaper with a chain, and the part that sells it is that it moves: on sound, the head turns, the hands lift, the eyes go red and a male voice starts talking. Because it is battery powered you can put...

Description： A life-size ghost with a trident and a body that lights up green from inside. It is sound activated, so it sits quiet until someone walks past, then the voice and the glow come on together - which is the version of a...

Description： Seven pumpkins on one inflatable runner, with a matching set of seven LED string lights worked along the top. It is long and low - about seven and a half feet across and under three feet tall - so it does the steps,...

Description： Eight pieces that cover a yard in one go: three ghosts to hang from the porch or the trees, two gravestones for the ground, a crawling skeleton, and a five and a half foot cobweb with a spider for the focal point. The...

Description： Two oversized eyeballs, three feet across each, and the light comes from inside them - white LEDs behind the green iris, so they glow rather than reflect. A pair is the right number: one looks like a prop, two look like something is...

Description： Eight feet of pumpkins, ghosts, eyeballs and spilled candy in one low inflatable strip, which is the shape that actually lines a walkway instead of sitting in the middle of the yard. Warm white LEDs run inside the whole thing, so the candy...

Description： A ghost with an instrument and a small dog along for the act, seven and a half feet of it. It is the joke option in an otherwise scary yard, and the pup is the reason people stop and photograph it. Six built-in...

Description： White ghosts and bats on one tall frame of an inflatable, in white and green, with 82 string lights running through them plus four LED modules. The bats flash rather than stay lit, so the top of the display moves while the ghosts...

Description： Two skeletons coming up out of the tombstones and holding a HAPPY HALLOWEEN banner between them - a wide, low display that reads as a greeting first and a scare second. That makes it the one piece the neighbors do not mind, and...

Description： An eight foot arch of stacked pumpkins with ghosts perched on it, built for the one moment that matters: people walking in under it. Seven internal white LEDs run the top and the sides, so it frames a path or a driveway instead...

Description： A twelve foot reaper leaning over a set of skeleton ribs and a pumpkin, all one piece, so the scene looks arranged instead of dropped in. Three LED modules carry the main shapes and 115 string lights run through the rest of it,...

Description： This is a clown that hangs in your window from the inside - arms up, face pressed to the glass, as if it just put a shoulder into the sash and broke through. It is three feet three of inflatable, so it fills...

Description： A reaper on a bicycle, six feet across - the joke that works as well on the sidewalk as the scary ones do. Two interior LEDs light the figure from inside at night, and the black, red and white coloring keeps it readable...

Description： This is a six foot white ghost caught mid-stride - the body leans and the arms are up, so it looks like it is moving across the lawn rather than standing on it. Three white LEDs are inside it, which is enough to...

Description： This is a seven foot skeleton lying flat on its back across the lawn - the one that stops people on the path because it reads as a body rather than as a decoration. Seven built-in LEDs give it a soft glow after...

Description： A twelve foot reaper with a carved pumpkin for a head, standing at the end of the driveway where everyone has to walk past it. The head burns with a three-color flame light rather than a flat glow, so the face flickers the...

Description： This spider is ten feet wide and five tall, which is wide enough to sit across a porch or down a hedge line and read as a hazard rather than an ornament. The head carries a bright white LED and two red tunnel...

Description： This is an eight and a half foot saucer you can actually stand inside - the middle is an open ring, so one person, a kid in a costume, or a dog can be the abductee while the rim lights up around them....

Description： These are six and a half feet of inflatable tentacles with four sets of built-in LEDs, and the trick they are built for is the car window - drape them over the roof so the octopus looks like it is climbing out of...

Description： This is a twelve foot pumpkin man carrying a skull - the height is the point, since it reads from the road and sets the tone for the rest of the display before anyone reaches the door. Five white interior LEDs light it...

Description： This is a six foot skeleton with four posable arms and a spare skull, and it is the movement that sells it: it wakes on sound, so a shout or a clap from the path sets it trembling and swinging while the eyes...

Description： This is an iron skull with a vintage finish, cut and shaped for outdoor use - hang it on a fence rail, stand it at the back of a border, or set it inside a window where the daylight comes through the eye...

Description： This is a cut-iron wall piece with the busy, filigree look that reads as gothic rather than as novelty - the kind of hanging you leave up past October because it works against a plain wall in a bedroom, a hallway or a...

Description： This is the vampire and the coffin together - one piece, nearly six feet across, so the display looks staged rather than assembled. Interior LEDs light the scene through the fabric at night, and two blowers run it, which is why it holds...